MonitorSelector The right monitor, worked out for your desk.

Guide

Choosing a monitor for programming

Code is the most demanding text there is: small monospaced characters, fine punctuation, read for hours. Two things matter above all, the sharpness of the characters and the number of lines and columns you can keep in view.

Updated 14 November 2026 · 2 min read

Your desk, your work

1 Main use
2 Desk and distance
75 cm
70 cm

Estimated from your desk. Move the slider if you have measured it.

3 Layout
4 Time spent reading text
5 Budget
6 System

Recommended for you

32″ 4K UHD

3840 × 2160 · IPS · 60–100 Hz

90/100

At 70 cm, a 32″ 4K UHD fills 53° of your field of view: wide enough to work in, narrow enough to read without turning your head. With 67 pixels per degree, the pixel grid is below what the eye can resolve. For code the priority goes to sharp characters and to the number of lines and columns on screen.

53°70 cm70 cm
Viewing angle ?
53° comfortable from 40° to 53°
Sharpness ?
67 PPD 140 PPI on the panel, target 60 PPD
Screen surface
70 × 39 cm comfortable from 70 cm to 96 cm
Scaling ?
125% workspace equal to 3072 × 1728
Panel ?
IPS stable colours and clean text from any angle
Connection ?
DisplayPort 1.4 or better, for 100 Hz

See 32″ 4K UHD monitors at Currys

  • Cheaper27″ 4K UHD3840 × 2160 · 163 PPI · 78 PPD · 46°
    89See at Currys
Compare the best-placed formats
FormatViewing anglePPDScalingScore
32″ 4K UHD53°67125% 90
27″ 4K UHD46°78150% 89
2 × 24″ QHD82°59100% 84
24″ QHD41°59100% 82
34″ UWQHD59°53100% 81
2 × 27″ QHD92°52100% 79

The score weighs viewing angle, sharpness, workspace, motion, colour and price according to your use. Read the method

Affiliate link: if you buy after clicking, the site may earn a commission at no extra cost to you. The recommendation is computed first.

Sharpness first

A programming font at its usual size is 9 or 10 pixels wide on a 1440p screen. The difference between a comma and a full stop, between a lowercase l and a 1, rests on two or three pixels. At 49 pixels per degree, the density of a 27-inch 1440p screen at 65 cm, these characters are legible but visibly built from a grid. At 73 pixels per degree, on a 27-inch 4K screen, the same characters are drawn with more than twice as many pixels and look printed.

The effect on fatigue is real: the eye focuses more easily on sharp edges than on soft ones. For those who read code all day, pixel density is the first criterion, ahead of size.

Lines and columns

What an editor can show depends on the workspace after scaling, not on the raw resolution.

ScreenScalingWorkspaceLines of codeColumns side by side
24-inch 1080p100%1920 × 1080about 502 files of 100
27-inch 1440p100%2560 × 1440about 702 files of 120, or 3 of 90
27-inch 4K150%2560 × 1440about 70the same, sharper
32-inch 4K125%3072 × 1728about 853 files of 110
34-inch ultrawide100%3440 × 1440about 703 files of 120
27-inch in portrait100%1440 × 2560about 1251 file of 150

The figures assume a 14-pixel font and an editor with its usual panels. They show that the 32-inch 4K screen is the single screen that combines the most workspace with clean text, provided the desk is deep enough: it asks for 70 cm of viewing distance or more.

One screen or two

Programming is rarely done in one window. Editor, terminal, documentation, the application being tested: the work divides naturally, which is why two screens suit it so well. A classic and very effective arrangement puts the main screen in landscape straight ahead and a second one in portrait to the side, for documentation, logs or a long file. A 24 or 27-inch screen turned vertically shows more than a hundred lines.

An ultrawide suits those who prefer three columns on one surface and dislike a bezel in their field of view. The chapter ultrawide or two monitors compares both with numbers.

The rest of the specification

  • Panel: IPS, for uniform text over the whole surface. OLED renders text with coloured fringes at 110 PPI; acceptable only in 4K, and static interfaces such as an editor are its worst case for burn-in.
  • Refresh rate: 100 or 120 Hz makes scrolling through a file noticeably more legible. Not indispensable, quickly appreciated.
  • Coating: matte. Dark themes turn a glossy screen into a mirror.
  • Connection: with a laptop, USB-C with 90 W of power delivery and a built-in hub reduces the desk to one cable.
  • macOS: text is not smoothed at sub-pixel level; 1440p looks softer than on Windows. Prefer 4K, or 5K on 27 inches for a perfect 2x rendering.

Frequently asked questions

Is 4K worth it for programming?

Yes, for sharpness. On 27 inches at 150% scaling, 4K shows the same amount of code as 1440p but draws each character with 2.25 times more pixels. On 32 inches at 125% it also shows about 20% more lines and columns.

Is a 27-inch or a 32-inch monitor better for coding?

32 inches in 4K if your desk gives 70 cm of viewing distance or more: more code in view at a comfortable text size. 27 inches in 4K otherwise: the same sharpness on a shallower desk.

Is a vertical monitor good for coding?

As a second screen, very. A 27-inch 1440p screen in portrait shows about 125 lines of code or a full page of documentation. As the only screen it is too narrow for side-by-side work.